NitorAQUA Primer 0,75l
292,00 kr.
Ekskl. moms
WATER-BASED sealer varnish, VERY EASY to apply.
NO SMELL , colourless with high filling power, easy sanding, good transparency and excellent thixotropy.
Its fast drying, resistance to yellowing and absence of odour make it a technologically innovative and environmentally friendly product.
Non-flammable product.
It can be easily applied vertically and can be cleaned and diluted with water.
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
NitorAqua Primer Application.
- Dilution: 15-20% with distilled water, alcohol, or solvent. The ratio will depend on the type of spray gun and its setup. We recommend using a spray gun with a nozzle size of 1.7 or larger.
- Wood Preparation: The wood should be uniform and free of imperfections. Sand progressively (240-400-800 grit) always in the direction of the grain.
- Application: Apply with a spray gun in several cross-coats until the surface is fully covered, avoiding applying too much product to prevent runs or sags. Once dry, sand with P400 grit to ensure adhesion and level the surface, then apply a new coat.
Repeat the process until the surface is completely smooth and free of imperfections, ensuring the wood grain is filled.
Water-based products have a whitish colour which disappears when dry.
- Drying Time: Allow at least 7-8 hours between coats. Final drying is achieved in 24-48 hours.
270031110 Aqua
Anmeldelser (0)
Der er ingen kundeanmeldelser endnu.
Sete varer
16 andre varer i den samme kategori:
WATER-BASED sealer varnish, VERY EASY to apply.
NO SMELL , colourless with high filling power, easy sanding, good transparency and excellent thixotropy.
Its fast drying, resistance to yellowing and absence of odour make it a technologically innovative and environmentally friendly product.
Non-flammable product.
It can be easily applied vertically and can be cleaned and diluted with water.